| Type: | Gravity Separator |
|---|---|
| Voltage: | 380V |
| Weight: | 1T |
| Material: | Carbon Steel |
| Material Feature: | Oil Resistant |
| Certification: | ISO9001:2008, CE |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
2.Working Principle:
In the horizontal projection, there is a gradient field of tangential acceleration on the radial of the conical surface. In this process, due to the difference in density of mineral particles, the centrifugal force of the mineral particles is also different. The greater the density, the greater the centrifugal force, and the closer it is to the inner wall of the rotating sleeve. The closer to the inner wall, the greater its tangential velocity, which in turn promotes the particles to generate greater centrifugal force, making them closer to the inner wall and stored in the annular groove cavity.
Since the mineral particles are in the centrifugal force field produced by the high-speed rotation of the rotating sleeve, the minerals are enriched by obtaining different centrifugal accelerations due to different densities, so its sorting efficiency is far more than that of general heavy media separation equipment that operates in the gravitational field.
Technical Data Sheet of LXJ Type Vertical Centrifugal Ore Separator
| Type | Capacity (t/h) | Feeding Size | Feeding concentration | Back Wash Water(t/h) | Output(kg/T) | Motor Power(KW) | Paressure Water (Mpa) |
Outline(mm) | Weight(kg) |
| YC-60 | 10-15 | <6mm | <50% | 10-15 | 30-40 | 7.5 | 0.1-0.16 | 1970*1670*1830 | 1350 |
| YC-80 | 35-40 | <6mm | <50% | 17-25 | 60-70 | 18.5 | 0.1-0.16 | 2300*1800*1870 | 1900 |
| YC-100 | 80-120 | <6mm | <50% | 40-60 | 70-80 | 22 | 0.1-0.2 | 2500*2000*2450 | 3000 |
| YC-120 | 120-150 | <6mm | <50% | 80-100 | 100-120 | 30 | 0.15-0.2 | 2500*2500*3000 | 4000 |
Product Photos
Equipment Operation
1.Preparations and Inspections Before Starting:
a:Prepare and inspect the electric motor according to the requirements for its use.
b:Check whether the equipment feet are stable.
c.Check the tightness of the V-belt, which should be moderately tight. (The adjustment has been made before leaving the factory)
d.Check for any interference in the moving parts of the equipment and manually rotate the equipment for inspection.
e.Check if the discharge port of the drive shaft (3) is blocked.
2.Starting the Equipment:
After the above five checks, connect the power supply, momentarily start the electric motor, and check for any interference in the moving parts before starting the equipment normally.
3.Feeding Ore and Water:
Once the equipment is running normally, feed the ore pulp with the required solid-liquid ratio.
4.Attention During Equipment Operation:
a:Monitor the temperature and current of the electric motor according to its regular use.
b:Pay attention to the condition of all moving parts for any abnormalities.
c:Pay attention to the solid-liquid ratio of the ore pulp and adjust it in time.
5.Stopping the Equipment:
This equipment should be cleaned of concentrate once every shift during normal operation. Before stopping the machine, stop feeding the ore pulp first, then stop the machine. After the equipment has stopped, lift the plug at the discharge port of the drive shaft (3), and flush out the concentrate. The cleaning time for the concentrate is about 15-20 minutes. Then plug it tightly and proceed to the next cycle.
6.Emergency Equipment Shutdown:
If there is a special situation that requires a temporary shutdown, be sure to stop feeding the ore first, and then stop the machine. However, the shutdown time should not be too long to prevent the heavy sand on the partition of the rotating sleeve (5) from solidifying over a long period. (If a long shutdown is needed, clean the concentrate before stopping the machine.) In addition, after a temporary shutdown, be sure to feed the ore pulp first to avoid the loss of gold particles when restarting.
Equipment Maintenance
"People-oriented and developing industry through science and technology" is the company's business philosophy. In recent years, the company has developed and improved the ore-dressing equipment combining the different needs of users and the improvement has been approved by customers. The products are welcomed by the customers for their reliable quality, superior performance and good services. The company is awarded the titles of "Enterprise of Abiding by Strictly Contract and Being Trust Worthy" by Yantai Administration for industry and Commerce and "Consumer Satisfaction Unit". With spirit of "Striving for Survival with Top Quality and Promoting Development with Good Reputation", the company takes the lead in passing the ISO9001-2015 international quality management system in the same industry.
It guarantees the quality and the non-conforming products are not permitted to be sold. The company occupies the market both at home and abroad rapidly because of the high quality and reliable performance of the products. The products have been exported to Vietnam, Korea, Indonesia and other countries in Africa, Asia, South America. Jinhao Mining machine have built branch office in Zimbabwe and Tanzania. The company carries out regular management and product diversification, and it is unique in the industry.
FAQ
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}